• Diagnose your Configuration with Istioctl Analyze
    • Getting started in under a minute
    • Analyzing live clusters, local files, or both
    • Helping us improve this tool
    • Q&A
    • Advanced
      • Getting the latest version of istioctl analyze
      • Enabling validation messages for resource status
    • See also

    Diagnose your Configuration with Istioctl Analyze

    The following information describes an experimental feature, which is intendedfor evaluation purposes only.

    istioctl analyze is a diagnostic tool that can detect potential issues with yourIstio configuration. It can run against a live cluster or a set of local configuration files.It can also run against a combination of the two, allowing you to catch problems before youapply changes to a cluster.

    Getting started in under a minute

    You can analyze your current Kubernetes cluster by running:

    1. $ istioctl x analyze -k

    And that’s it! It’ll give you any recommendations that apply.

    For example, if you forgot to enable Istio injection (a very common issue), you would get the following warning:

    1. Warn [IST0102](Namespace default) The namespace is not enabled for Istio injection. Run 'kubectl label namespace default istio-injection=enabled' to enable it, or 'kubectl label namespace default istio-injection=disabled' to explicitly mark it as not needing injection

    Note that x in the command is because this is currently an experimental feature.

    Analyzing live clusters, local files, or both

    The example above is doing analysis on a live cluster. But the tool also supports performing analysis of a set of local Kubernetes yaml configuration files,or on a combination of local files and a live cluster. When analyzing a set of local files, the file set is expected to be fully self-contained.Typically, this is used to analyze the entire set of configuration files that are intended to be deployed to a cluster.

    Analyze a specific set of local Kubernetes yaml files:

    1. $ istioctl x analyze a.yaml b.yaml

    Analyze all yaml files in the current folder:

    1. $ istioctl x analyze *.yaml

    Simulate applying the files in the current folder to the current cluster:

    1. $ istioctl x analyze -k *.yaml

    You can run istioctl x analyze —help to see the full set of options.

    Helping us improve this tool

    We’re continuing to add more analysis capability and we’d love your help in identifying more use cases.If you’ve discovered some Istio configuration “gotcha”, some tricky situation that caused you someproblems, open an issue and let us know. We might be able to automatically flag this problem so thatothers can discover and avoid the problem in the first place.

    To do this, open an issue describing your scenario. For example:

    • Look at all the virtual services
    • For each, look at their list of gateways
    • If some of the gateways don’t exist, produce an error

    We already have an analyzer for this specific scenario, so this is just an example to illustrate whatthe kind of information you should provide.

    Q&A

    • What Istio release does this tool target?

    Like other istioctl tools, we generally recommend using a downloaded version that matches the version deployed in your cluster.

    For the time being, analysis is generally backwards compatible, so that you can e.g. run the 1.4 version of istioctl analyze against a cluster running Istio 1.1 and expect to get useful feedback. Analysis rules that are not meaningful with an older Istio release will be skipped.

    If you decide to use the latest istioctl for analysis purposes on a cluster running an older Istio version, we suggest that you keep it in a separate folder from the version of the binary used to manage your deployed Istio release.

    • What analyzers are supported today?

    We’re still working to documenting the analyzers. In the meantime, you can see all the analyzers in the Istio source.

    You can also see what configuration analysis messagesare supported to get an idea of what is currently covered.

    • Can analysis do anything harmful to my cluster?

    Analysis never changes configuration state. It is a completely read-only operation and so will never alter the state of a cluster.

    • What about analysis that goes beyond configuration?

    Today, the analysis is purely based on Kubernetes configuration, but in the future we’d like to expand beyond that. For example, we could allow analyzers to also look at logs to generate recommendations.

    • Where can I find out how to fix the errors I’m getting?

    The set of configuration analysis messages contains descriptions of each message along with suggested fixes.

    Advanced

    Getting the latest version of istioctl analyze

    Although istioctl analyze is included in versions of Istio 1.4 and beyond, you can also directly download the verylatest version to use on your cluster. This version may be unstable, but will have the most complete and up to date setof analyzers and may find issues that older versions miss.

    You can download the latest istioctl into the current folder using the following command:

    1. $ curl https://storage.googleapis.com/istio-build/dev/latest | xargs -I {} curl https://storage.googleapis.com/istio-build/dev/{}/istioctl-{}-osx.tar.gz | tar xvz
    1. $ curl https://storage.googleapis.com/istio-build/dev/latest | xargs -I {} curl https://storage.googleapis.com/istio-build/dev/{}/istioctl-{}-linux.tar.gz | tar xvz

    Enabling validation messages for resource status

    The following information describes an experimental feature, which is intendedfor evaluation purposes only.

    Starting with Istio 1.4, Galley can be set up to perform configuration analysis alongside the configuration distribution that it is primarily responsible for, via the galley.enableAnalysis flag.This analysis uses the same logic and error messages as when using istioctl analyze. Validation messages from the analysis are written to the status subresource of the affected Istio resource.

    For example. if you have a misconfigured gateway on your “ratings” virtual service, running kubectl get virtualservice ratings would give you something like:

    1. apiVersion: networking.istio.io/v1alpha3
    2. kind: VirtualService
    3. metadata:
    4. annotations:
    5. kubectl.kubernetes.io/last-applied-configuration: |
    6. {"apiVersion":"networking.istio.io/v1alpha3","kind":"VirtualService","metadata":{"annotations":{},"name":"ratings","namespace":"default"},"spec":{"hosts":["ratings"],"http":[{"route":[{"destination":{"host":"ratings","subset":"v1"}}]}]}}
    7. creationTimestamp: "2019-09-04T17:31:46Z"
    8. generation: 11
    9. name: ratings
    10. namespace: default
    11. resourceVersion: "12760039"
    12. selfLink: /apis/networking.istio.io/v1alpha3/namespaces/default/virtualservices/ratings
    13. uid: dec86702-cf39-11e9-b803-42010a8a014a
    14. spec:
    15. gateways:
    16. - bogus-gateway
    17. hosts:
    18. - ratings
    19. http:
    20. - route:
    21. - destination:
    22. host: ratings
    23. subset: v1
    24. status:
    25. validationMessages:
    26. - code: IST0101
    27. level: Error
    28. message: 'Referenced gateway not found: "bogus-gateway"'

    enableAnalysis runs in the background, and will keep the status field of a resource up to date with its current validation status. Note that this isn’t a replacement for istioctl analyze:

    • Not all resources have a custom status field (e.g. Kubernetes namespace resources), so messages attached to those resources won’t show validation messages.
    • enableAnalysis only works on Istio versions starting with 1.4, while istioctl analyze can be used with older versions.
    • While it makes it easy to see what’s wrong with a particular resource, it’s harder to get a holistic view of validation status in the mesh.

    You can enable this feature with:

    1. $ istioctl manifest apply --set values.galley.enableAnalysis=true

    See also

    Understand your Mesh with Istioctl Describe

    Shows you how to use istioctl describe to verify the configurations of a pod in your mesh.

    Introducing istioctl analyze

    Analyze your Istio configuration to detect potential issues and get general insights.

    Customizable Install with Istioctl

    Install and customize any Istio configuration profile for in-depth evaluation or production use.

    DNS Certificate Management

    Provision and manage DNS certificates in Istio.

    Introducing the Istio Operator

    Introduction to Istio's new operator-based installation and control plane management feature.

    Secure Webhook Management

    A more secure way to manage Istio webhooks.