• Deployment Models
    • Cluster models
      • Single cluster
      • Multiple clusters
    • Network models
      • Single network
      • Multiple networks
    • Control plane models
    • Identity and trust models
      • Trust within a mesh
      • Trust between meshes
    • Mesh models
      • Single mesh
      • Multiple meshes
    • Tenancy models
      • Namespace tenancy
      • Cluster tenancy
    • 相关内容

    Deployment Models

    Important system models impact your overall Istio deployment model. This pagediscusses the options for each of these models and describes how you canconfigure Istio to address them.

    Cluster models

    The workload instances of your application run in one or more clusters. For isolation, performance, andhigh availability, you can confine clusters to availability zones and regions.

    Production systems, depending on their requirements, can run across multipleclusters spanning a number of zones or regions, leveraging cloud load balancersto handle things like locality and zonal or regional fail over.

    In most cases, clusters represent boundaries for configuration and endpointdiscovery. For example, each Kubernetes cluster has an API Server which managesthe configuration for the cluster as well as serving service endpoint information as pods are brought upor down. Since Kubernetes configures this behavior on a per-cluster basis, thisapproach helps limit the potential problems caused by incorrect configurations.

    In Istio, you can configure a single service mesh to span any number ofclusters.

    Single cluster

    In the simplest case, you can confine an Istio mesh to a single cluster. A cluster usually operates over asingle network, but it varies between infrastructureproviders. A single cluster and single network model includes a control plane,which results in the simplest Istio deployment.

    A service mesh with a single cluster

    A service mesh with a single cluster

    Single cluster deployments offer simplicity, but lack other features, forexample, fault isolation and fail over. If you need higher availability, youshould use multiple clusters.

    Multiple clusters

    You can configure a single mesh to includemultiple multicluster deployment within a single mesh affordsthe following capabilities beyond that of a single cluster deployment:

    • Fault isolation and fail over: cluster-1 goes down, fail over to cluster-2.
    • Location-aware routing and fail over: Send requests to the nearest service.
    • Various control plane models: Support differentlevels of availability.
    • Team or project isolation: Each team runs its own set of clusters.

    A service mesh with multiple clusters

    A service mesh with multiple clusters

    Multicluster deployments give you a greater degree of isolation andavailability but increase complexity. If your systems have high availabilityrequirements, you likely need clusters across multiple zones and regions. Youcan canary configuration changes or new binary releases in a single cluster,where the configuration changes only affect a small amount of user traffic.Additionally, if a cluster has a problem, you can temporarily route traffic tonearby clusters until you address the issue.

    You can configure inter-cluster communication based on thenetwork and the options supported by your cloud provider. Forexample, if two clusters reside on the same underlying network, you can enablecross-cluster communication by simply configuring firewall rules.

    Network models

    Many production systems require multiple networks or subnets for isolationand high availability. Istio supports spanning a service mesh over a variety ofnetwork topologies. This approach allows you to select the network model thatfits your existing network topology.

    Single network

    In the simplest case, a service mesh operates over a single fully connectednetwork. In a single network model, all workload instancescan reach each other directly without an Istio gateway.

    A single network allows Istio to configure service consumers in a uniformway across the mesh with the ability to directly address workload instances.

    A service mesh with a single network

    A service mesh with a single network

    Multiple networks

    You can span a single service mesh across multiple networks; such aconfiguration is known as multi-network.

    Multiple networks afford the following capabilities beyond that of single networks:

    • Overlapping IP or VIP ranges for service endpoints
    • Crossing of administrative boundaries
    • Fault tolerance
    • Scaling of network addresses
    • Compliance with standards that require network segmentation

    In this model, the workload instances in different networks can only reach eachother through one or more Istio gateways.Istio uses partitioned service discovery to provide consumers a differentview of service endpoints. The view depends on thenetwork of the consumers.

    A service mesh with multiple networks

    A service mesh with multiple networks

    Control plane models

    An Istio mesh uses the control plane to configure allcommunication between workload instances within the mesh. You can replicate thecontrol plane, and workload instances connect to any control plane instance toget their configuration.

    In the simplest case, you can run your mesh with a control plane on a singlecluster.

    A service mesh with a control plane

    A service mesh with a control plane

    Multicluster deployments can also share control plane instances. In this case,the control plane instances can reside in one or more clusters.

    A service mesh with two clusters sharing a control plane

    A service mesh with two clusters sharing a control plane

    For high availability, you should deploy a control plane across multipleclusters, zones, or regions.

    A service mesh with control plane instances for each region

    A service mesh with control plane instances for each region

    This model affords the following benefits:

    • Improved availability: If a control plane becomes unavailable, the scope ofthe outage is limited to only that control plane.

    • Configuration isolation: You can make configuration changes in one cluster,zone, or region without impacting others.

    You can improve control plane availability through fail over. When a controlplane instance becomes unavailable, workload instances can connect toanother available control plane instance. Fail over can happen across clusters,zones, or regions.

    A service mesh after a control plane instance fails

    A service mesh after a control plane instance fails

    The following list ranks control plane deployment examples by availability:

    • One cluster per region (lowest availability)
    • Multiple clusters per region
    • One cluster per zone
    • Multiple clusters per zone
    • Each cluster (highest availability)

    Identity and trust models

    When a workload instance is created within a service mesh, Istio assigns theworkload an identity.

    The Certificate Authority (CA) creates and signs the certificates used to verifythe identities used within the mesh. You can verify the identity of the message senderwith the public key of the CA that created and signed the certificatefor that identity. A trust bundle is the set of all CA public keys used byan Istio mesh. With a mesh’s trust bundle, anyone can verify the sender of anymessage coming from that mesh.

    Trust within a mesh

    Within a single Istio mesh, Istio ensures each workload instance has anappropriate certificate representing its own identity, and the trust bundlenecessary to recognize all identities within the mesh and any federated meshes.The CA only creates and signs the certificates for those identities. This modelallows workload instances in the mesh to authenticate each other whencommunicating.

    A service mesh with a certificate authority

    A service mesh with a certificate authority

    Trust between meshes

    If a service in a mesh requires a service in another, you must federate identityand trust between the two meshes. To federate identity and trust, you mustexchange the trust bundles of the meshes. You can exchange the trust bundleseither manually or automatically using a protocol such as SPIFFE Trust Domain Federation.Once you import a trust bundle to a mesh, you can configure local policies forthose identities.

    Multiple service meshes with certificate authorities

    Multiple service meshes with certificate authorities

    Mesh models

    Istio supports having all of your services in a mesh, or federating multiple meshestogether, which is also known as multi-mesh.

    Single mesh

    The simplest Istio deployment is a single mesh. Within a mesh, service names areunique. For example, only one service can have the name mysvc in the foonamespace. Additionally, workload instances share a common identity sinceservice account names are unique within a namespace, just like service names.

    A single mesh can span one or more clusters andone or more networks. Within a mesh,namespaces are used for tenancy.

    Multiple meshes

    Multiple mesh deployments result from mesh federation.

    Multiple meshes afford the following capabilities beyond that of a single mesh:

    • Organizational boundaries: lines of business
    • Service name or namespace reuse: multiple distinct uses of the defaultnamespace
    • Stronger isolation: isolating test workloads from production workloads You can enable inter-mesh communication with mesh federation. When federating, each mesh can expose a set of services andidentities, which all participating meshes can recognize.

    Multiple service meshes

    Multiple service meshes

    To avoid service naming collisions, you can give each mesh a globally uniquemesh ID, to ensure that the fully qualified domainname (FQDN) for each service is distinct.

    When federating two meshes that do not share the same trust domain, you must federate identity and trust bundles between them. See thesection on Multiple Trust Domains for an overview.

    Tenancy models

    In Istio, a tenant is a group of users that sharecommon access and privileges to a set of deployed workloads. Generally, youisolate the workload instances from multiple tenants from each other throughnetwork configuration and policies.

    You can configure tenancy models to satisfy the following organizationalrequirements for isolation:

    • Security
    • Policy
    • Capacity
    • Cost
    • Performance

    Istio supports two types of tenancy models:

    • Namespace tenancy
    • Cluster tenancy

    Namespace tenancy

    Istio uses namespacesas a unit of tenancy within a mesh. Istio also works in environments that don’timplement namespace tenancy. In environments that do, you can grant a teampermission to deploy their workloads only to a given namespace or set ofnamespaces. By default, services from multiple tenant namespaces can communicatewith each other.

    A service mesh with two isolated namespaces

    A service mesh with two isolated namespaces

    To improve isolation, you can selectively choose which services to expose toother namespaces. You can configure authorization policies for exposed servicesto restrict access to only the appropriate callers.

    A service mesh with two namespaces and an exposed service

    A service mesh with two namespaces and an exposed service

    When using multiple clusters, the namespaces in eachcluster sharing the same name are considered the same namespace. For example,Service B in the foo namespace of cluster-1 and Service B in thefoo namespace of cluster-2 refer to the same service, and Istio merges theirendpoints for service discovery and load balancing.

    A service mesh with two clusters with the same namespace

    A service mesh with clusters with the same namespace

    Cluster tenancy

    Istio supports using clusters as a unit of tenancy. In this case, you can giveeach team a dedicated cluster or set of clusters to deploy theirworkloads. Permissions for a cluster are usually limited to the members of theteam that owns it. You can set various roles for finer grained control, forexample:

    • Cluster administrator
    • Developer

    To use cluster tenancy with Istio, you configure each cluster as an independentmesh. Alternatively, you can use Istio to implement a group of clusters as asingle tenant. Then, each team can own one or more clusters, but you configureall their clusters as a single mesh. To connect the meshes of the various teamstogether, you can federate the meshes into a multi-mesh deployment.

    Two isolated service meshes with two clusters and two namespaces

    Two isolated service meshes with two clusters and two namespaces

    Since a different team or organization operates each mesh, service namingis rarely distinct. For example, the mysvc in the foo namespace ofcluster-1 and the mysvc service in the foo namespace ofcluster-2 do not refer to the same service. The most common example is thescenario in Kubernetes where many teams deploy their workloads to the defaultnamespace.

    When each team has their own mesh, cross-mesh communication follows theconcepts described in the multiple meshes model.

    相关内容

    Istio Soft Multi-Tenancy Support

    Using Kubernetes namespaces and RBAC to create an Istio soft multi-tenancy environment.