• Pods
    • What is a Pod?
      • Pod diagram
  • Motivation for Pods
    • Management
    • Resource sharing and communication
  • Uses of pods
  • Alternatives considered
  • Durability of pods (or lack thereof)
  • Termination of Pods
    • Force deletion of pods
  • Privileged mode for pod containers
  • API Object
  • Feedback

    Pods

    Pods are the smallest deployable units of computing that can be created andmanaged in Kubernetes.

    What is a Pod?

    A Pod (as in a pod of whales or pea pod) is a group of one or morecontainersA lightweight and portable executable image that contains software and all of its dependencies. (such asDocker containers), with shared storage/network, and a specificationfor how to run the containers. A Pod’s contents are always co-located andco-scheduled, and run in a shared context. A Pod models anapplication-specific “logical host” - it contains one or more applicationcontainers which are relatively tightly coupled — in a pre-containerworld, being executed on the same physical or virtual machine would mean beingexecuted on the same logical host.

    While Kubernetes supports more container runtimes than just Docker, Docker isthe most commonly known runtime, and it helps to describe Pods in Docker terms.

    The shared context of a Pod is a set of Linux namespaces, cgroups, andpotentially other facets of isolation - the same things that isolate a Dockercontainer. Within a Pod’s context, the individual applications may havefurther sub-isolations applied.

    Containers within a Pod share an IP address and port space, andcan find each other via localhost. They can also communicate with eachother using standard inter-process communications like SystemV semaphores orPOSIX shared memory. Containers in different Pods have distinct IP addressesand can not communicate by IPC withoutspecial configuration.These containers usually communicate with each other via Pod IP addresses.

    Applications within a Pod also have access to shared volumesA directory containing data, accessible to the containers in a pod., which are definedas part of a Pod and are made available to be mounted into each application’sfilesystem.

    In terms of Docker constructs, a Pod is modelled asa group of Docker containers with shared namespaces and shared filesystemvolumes.

    Like individual application containers, Pods are considered to be relativelyephemeral (rather than durable) entities. As discussed inpod lifecycle, Pods are created, assigned a unique ID (UID), andscheduled to nodes where they remain until termination (according to restartpolicy) or deletion. If a NodeA node is a worker machine in Kubernetes. dies, the Pods scheduled to that node arescheduled for deletion, after a timeout period. A given Pod (as defined by a UID) is not“rescheduled” to a new node; instead, it can be replaced by an identical Pod,with even the same name if desired, but with a new UID (see replicationcontroller for more details).

    When something is said to have the same lifetime as a Pod, such as a volume,that means that it exists as long as that Pod (with that UID) exists. If thatPod is deleted for any reason, even if an identical replacement is created, therelated thing (e.g. volume) is also destroyed and created anew.

    Pods (EN) - 图1

    Pod diagram

    A multi-container Pod that contains a file puller and aweb server that uses a persistent volume for shared storage between the containers.

    Motivation for Pods

    Management

    Pods are a model of the pattern of multiple cooperating processes which form acohesive unit of service. They simplify application deployment and managementby providing a higher-level abstraction than the set of their constituentapplications. Pods serve as unit of deployment, horizontal scaling, andreplication. Colocation (co-scheduling), shared fate (e.g. termination),coordinated replication, resource sharing, and dependency management arehandled automatically for containers in a Pod.

    Resource sharing and communication

    Pods enable data sharing and communication among their constituents.

    The applications in a Pod all use the same network namespace (same IP and portspace), and can thus “find” each other and communicate using localhost.Because of this, applications in a Pod must coordinate their usage of ports.Each Pod has an IP address in a flat shared networking space that has fullcommunication with other physical computers and Pods across the network.

    Containers within the Pod see the system hostname as being the same as the configuredname for the Pod. There’s more about this in the networkingsection.

    In addition to defining the application containers that run in the Pod, the Podspecifies a set of shared storage volumes. Volumes enable data to survivecontainer restarts and to be shared among the applications within the Pod.

    Uses of pods

    Pods can be used to host vertically integrated application stacks (e.g. LAMP),but their primary motivation is to support co-located, co-managed helperprograms, such as:

    • content management systems, file and data loaders, local cache managers, etc.
    • log and checkpoint backup, compression, rotation, snapshotting, etc.
    • data change watchers, log tailers, logging and monitoring adapters, event publishers, etc.
    • proxies, bridges, and adapters
    • controllers, managers, configurators, and updaters

    Individual Pods are not intended to run multiple instances of the sameapplication, in general.

    For a longer explanation, see The Distributed System ToolKit: Patterns forCompositeContainers.

    Alternatives considered

    Why not just run multiple programs in a single (Docker) container?

    • Transparency. Making the containers within the Pod visible to theinfrastructure enables the infrastructure to provide services to thosecontainers, such as process management and resource monitoring. Thisfacilitates a number of conveniences for users.
    • Decoupling software dependencies. The individual containers may beversioned, rebuilt and redeployed independently. Kubernetes may even supportlive updates of individual containers someday.
    • Ease of use. Users don’t need to run their own process managers, worry aboutsignal and exit-code propagation, etc.
    • Efficiency. Because the infrastructure takes on more responsibility,containers can be lighter weight.Why not support affinity-based co-scheduling of containers?

    That approach would provide co-location, but would not provide most of thebenefits of Pods, such as resource sharing, IPC, guaranteed fate sharing, andsimplified management.

    Durability of pods (or lack thereof)

    Pods aren’t intended to be treated as durable entities. They won’t survive scheduling failures, node failures, or other evictions, such as due to lack of resources, or in the case of node maintenance.

    In general, users shouldn’t need to create Pods directly. They should almostalways use controllers even for singletons, for example,Deployments.Controllers provide self-healing with a cluster scope, as well as replicationand rollout management.Controllers like StatefulSetcan also provide support to stateful Pods.

    The use of collective APIs as the primary user-facing primitive is relatively common among cluster scheduling systems, including Borg, Marathon, Aurora, and Tupperware.

    Pod is exposed as a primitive in order to facilitate:

    • scheduler and controller pluggability
    • support for pod-level operations without the need to “proxy” them via controller APIs
    • decoupling of Pod lifetime from controller lifetime, such as for bootstrapping
    • decoupling of controllers and services — the endpoint controller just watches Pods
    • clean composition of Kubelet-level functionality with cluster-level functionality — Kubelet is effectively the “pod controller”
    • high-availability applications, which will expect Pods to be replaced in advance of their termination and certainly in advance of deletion, such as in the case of planned evictions or image prefetching.

    Termination of Pods

    Because Pods represent running processes on nodes in the cluster, it is important to allow those processes to gracefully terminate when they are no longer needed (vs being violently killed with a KILL signal and having no chance to clean up). Users should be able to request deletion and know when processes terminate, but also be able to ensure that deletes eventually complete. When a user requests deletion of a Pod, the system records the intended grace period before the Pod is allowed to be forcefully killed, and a TERM signal is sent to the main process in each container. Once the grace period has expired, the KILL signal is sent to those processes, and the Pod is then deleted from the API server. If the Kubelet or the container manager is restarted while waiting for processes to terminate, the termination will be retried with the full grace period.

    An example flow:

    • User sends command to delete Pod, with default grace period (30s)
    • The Pod in the API server is updated with the time beyond which the Pod is considered “dead” along with the grace period.
    • Pod shows up as “Terminating” when listed in client commands
    • (simultaneous with 3) When the Kubelet sees that a Pod has been marked as terminating because the time in 2 has been set, it begins the Pod shutdown process.
      • If one of the Pod’s containers has defined a preStop hook, it is invoked inside of the container. If the preStop hook is still running after the grace period expires, step 2 is then invoked with a small (2 second) extended grace period.
      • The container is sent the TERM signal. Note that not all containers in the Pod will receive the TERM signal at the same time and may each require a preStop hook if the order in which they shut down matters.
    • (simultaneous with 3) Pod is removed from endpoints list for service, and are no longer considered part of the set of running Pods for replication controllers. Pods that shutdown slowly cannot continue to serve traffic as load balancers (like the service proxy) remove them from their rotations.
    • When the grace period expires, any processes still running in the Pod are killed with SIGKILL.
    • The Kubelet will finish deleting the Pod on the API server by setting grace period 0 (immediate deletion). The Pod disappears from the API and is no longer visible from the client.By default, all deletes are graceful within 30 seconds. The kubectl delete command supports the —grace-period=<seconds> option which allows a user to override the default and specify their own value. The value 0 force deletes the Pod.You must specify an additional flag —force along with —grace-period=0 in order to perform force deletions.

    Force deletion of pods

    Force deletion of a Pod is defined as deletion of a Pod from the cluster state and etcd immediately. When a force deletion is performed, the API server does not wait for confirmation from the kubelet that the Pod has been terminated on the node it was running on. It removes the Pod in the API immediately so a new Pod can be created with the same name. On the node, Pods that are set to terminate immediately will still be given a small grace period before being force killed.

    Force deletions can be potentially dangerous for some Pods and should be performed with caution. In case of StatefulSet Pods, please refer to the task documentation for deleting Pods from a StatefulSet.

    Privileged mode for pod containers

    Any container in a Pod can enable privileged mode, using the privileged flag on the security context of the container spec. This is useful for containers that want to use Linux capabilities like manipulating the network stack and accessing devices. Processes within the container get almost the same privileges that are available to processes outside a container. With privileged mode, it should be easier to write network and volume plugins as separate Pods that don’t need to be compiled into the kubelet.

    Note: Your container runtime must support the concept of a privileged container for this setting to be relevant.

    API Object

    Pod is a top-level resource in the Kubernetes REST API.The Pod API object definitiondescribes the object in detail.

    Feedback

    Was this page helpful?

    Thanks for the feedback. If you have a specific, answerable question about how to use Kubernetes, ask it onStack Overflow.Open an issue in the GitHub repo if you want toreport a problemorsuggest an improvement.