• 开机自启动 Seafile
    • 对于运行 systemd 的系统
      • 创建 systemd 服务文件 /etc/systemd/system/seafile.service
      • 创建 systemd 服务文件 /etc/systemd/system/seahub.service
      • 创建 systemd 服务文件 /etc/systemd/system/seafile-client.service (可选)
      • 设置服务开机自启动
    • 对于使用 init 而非 systemd 的系统
    • Ubuntu 14.10 以及更旧的版本
      • 创建一个脚本 /etc/init.d/seafile-server
      • 确保 seafile-server 脚本可执行
      • 添加 seafile-server 到 rc.d 中
    • 其他基于 Debian 的发行版
      • 创建一个脚本 /etc/init.d/seafile-server
      • 为日志添文件加目录
      • 确保 seafile-server 脚本可执行
      • 添加 seafile-server 到 rc.d
      • 完成
    • RHEL/CentOS
    • RHEL/CentOS (run as service)
      • 创建文件 /etc/sysconfig/seafile
      • 创建一个脚本 /etc/init.d/seafile
      • 创建脚本 /etc/init.d/seahub

    开机自启动 Seafile

    对于运行 systemd 的系统

    • 例如 Debian 8 以及更新的版本，Ubuntu 15.04以及更新的版本。

    创建 systemd 服务管理文件，将以下示例中 ${seafile_dir} 替换为您自己的 seaile 安装路径，并且将 user 指向真正运行seafile的用户。然后您需要重新加载 systemd 的守护进程：systemctl daemon-reload。

    创建 systemd 服务文件 /etc/systemd/system/seafile.service

    1. sudo vim /etc/systemd/system/seafile.service

    文件内容如下：

    1. [Unit]
    2. Description=Seafile
    3. # add mysql.service or postgresql.service depending on your database to the line below
    4. After=network.target
    6. [Service]
    7. Type=oneshot
    8. ExecStart=${seafile_dir}/seafile-server-latest/seafile.sh start
    9. ExecStop=${seafile_dir}/seafile-server-latest/seafile.sh stop
    10. RemainAfterExit=yes
    11. User=seafile
    12. Group=seafile
    14. [Install]
    15. WantedBy=multi-user.target

    创建 systemd 服务文件 /etc/systemd/system/seahub.service

    1. sudo vim /etc/systemd/system/seahub.service

    文件内容如下(如果你想要运行fastcgi模式，请不要忘记修改它。)

    1. [Unit]
    2. Description=Seafile hub
    3. After=network.target seafile.service
    5. [Service]
    6. # change start to start-fastcgi if you want to run fastcgi
    7. ExecStart=${seafile_dir}/seafile-server-latest/seahub.sh start
    8. ExecStop=${seafile_dir}/seafile-server-latest/seahub.sh stop
    9. User=seafile
    10. Group=seafile
    11. Type=oneshot
    12. RemainAfterExit=yes
    14. [Install]
    15. WantedBy=multi-user.target

    创建 systemd 服务文件 /etc/systemd/system/seafile-client.service (可选)

    只有在你有了 seafile 控制台客户端并且希望开机运行此程序时你才需要创建此文件。

    1. sudo vim /etc/systemd/system/seafile-client.service

    文件内容如下：

    1. [Unit]
    2. Description=Seafile client
    3. # Uncomment the next line you are running seafile client on the same computer as server
    4. # After=seafile.service
    5. # Or the next one in other case
    6. # After=network.target
    8. [Service]
    9. Type=oneshot
    10. ExecStart=/usr/bin/seaf-cli start
    11. ExecStop=/usr/bin/seaf-cli stop
    12. RemainAfterExit=yes
    13. User=seafile
    14. Group=seafile
    16. [Install]
    17. WantedBy=multi-user.target

    设置服务开机自启动

    1. sudo systemctl enable seafile.service
    2. sudo systemctl enable seahub.service
    3. sudo systemctl enable seafile-client.service    # 可选

    对于使用 init 而非 systemd 的系统

    Ubuntu 14.10 以及更旧的版本

    在没有 systemd 的 Ubuntu 系统上，我们使用 /etc/init.d/ 脚本来设置 seafile/seahub 开机自启动。

    创建一个脚本 /etc/init.d/seafile-server

    1. sudo vim /etc/init.d/seafile-server

    脚本内容如下：(你需要根据实际情况修改 user 和 seafile_dir 的值)

    1. #!/bin/bash
    2. ### BEGIN INIT INFO
    3. # Provides:          seafile-server
    4. # Required-Start:    $remote_fs $syslog
    5. # Required-Stop:     $remote_fs $syslog
    6. # Default-Start:     2 3 4 5
    7. # Default-Stop:      0 1 6
    8. # Short-Description: Seafile server
    9. # Description:       Start Seafile server
    10. ### END INIT INFO
    12. # Change the value of "user" to your linux user name
    13. user=haiwen
    15. # Change the value of "seafile_dir" to your path of seafile installation
    16. # usually the home directory of $user
    17. seafile_dir=/data/haiwen
    18. script_path=${seafile_dir}/seafile-server-latest
    19. seafile_init_log=${seafile_dir}/logs/seafile.init.log
    20. seahub_init_log=${seafile_dir}/logs/seahub.init.log
    22. # Change the value of fastcgi to true if fastcgi is to be used
    23. fastcgi=false
    24. # Set the port of fastcgi, default is 8000. Change it if you need different.
    25. fastcgi_port=8000
    26. #
    27. # Write a polite log message with date and time
    28. #
    29. echo -e "\n \n About to perform $1 for seafile at `date -Iseconds` \n " >> ${seafile_init_log}
    30. echo -e "\n \n About to perform $1 for seahub at `date -Iseconds` \n " >> ${seahub_init_log}
    31. case "$1" in
    32.         start)
    33.                 sudo -u ${user} ${script_path}/seafile.sh ${1} >> ${seafile_init_log}
    34.                 if [ $fastcgi = true ];
    35.                 then
    36.                         sudo -u ${user} ${script_path}/seahub.sh ${1}-fastcgi ${fastcgi_port} >> ${seahub_init_log}
    37.                 else
    38.                         sudo -u ${user} ${script_path}/seahub.sh ${1} >> ${seahub_init_log}
    39.                 fi
    40.         ;;
    41.         restart)
    42.                 sudo -u ${user} ${script_path}/seafile.sh ${1} >> ${seafile_init_log}
    43.                 if [ $fastcgi = true ];
    44.                 then
    45.                         sudo -u ${user} ${script_path}/seahub.sh ${1}-fastcgi ${fastcgi_port} >> ${seahub_init_log}
    46.                 else
    47.                         sudo -u ${user} ${script_path}/seahub.sh ${1} >> ${seahub_init_log}
    48.                 fi
    49.         ;;
    50.         stop)
    51.                 sudo -u ${user} ${script_path}/seahub.sh ${1} >> ${seahub_init_log}
    52.                 sudo -u ${user} ${script_path}/seafile.sh ${1} >> ${seafile_init_log}
    53.         ;;
    54.         *)
    55.                 echo "Usage: /etc/init.d/seafile-server {start|stop|restart}"
    56.                 exit 1
    57.         ;;
    58. esac

    注意： 如果你正在使用本地 mysql 服务，请将 # Required-Start: $remote_fs $syslog 替换为 # Required-Start: $remote_fs $syslog mysql.

    确保 seafile-server 脚本可执行

    1. sudo chmod +x /etc/init.d/seafile-server

    添加 seafile-server 到 rc.d 中

    1. sudo update-rc.d seafile-server defaults

    注意： 如果你更新了你的 seafile 服务，不要忘记更新 script_path 的值。

    其他基于 Debian 的发行版

    创建一个脚本 /etc/init.d/seafile-server

    1. sudo vim /etc/init.d/seafile-server

    脚本内容如下：(你需要根据实际情况修改 user 和 seafile_dir 的值)

    1. #!/bin/sh
    3. ### BEGIN INIT INFO
    4. # Provides:          seafile-server
    5. # Required-Start:    $local_fs $remote_fs $network
    6. # Required-Stop:     $local_fs
    7. # Default-Start:     2 3 4 5
    8. # Default-Stop:      0 1 6
    9. # Short-Description: Starts Seafile Server
    10. # Description:       starts Seafile Server
    11. ### END INIT INFO
    13. # Change the value of "user" to linux user name who runs seafile
    14. user=haiwen
    16. # Change the value of "seafile_dir" to your path of seafile installation
    17. # usually the home directory of $user
    18. seafile_dir=/data/haiwen
    19. script_path=${seafile_dir}/seafile-server-latest
    20. seafile_init_log=${seafile_dir}/logs/seafile.init.log
    21. seahub_init_log=${seafile_dir}/logs/seahub.init.log
    23. # Change the value of fastcgi to true if fastcgi is to be used
    24. fastcgi=false
    25. # Set the port of fastcgi, default is 8000. Change it if you need different.
    26. fastcgi_port=8000
    28. #
    29. # Write a polite log message with date and time
    30. #
    31. echo -e "\n \n About to perform $1 for seafile at `date -Iseconds` \n " >> ${seafile_init_log}
    32. echo -e "\n \n About to perform $1 for seahub at `date -Iseconds` \n " >> ${seahub_init_log}
    34. case "$1" in
    35.         start)
    36.                 sudo -u ${user} ${script_path}/seafile.sh ${1} >> ${seafile_init_log}
    37.                 if [ $fastcgi = true ];
    38.                 then
    39.                         sudo -u ${user} ${script_path}/seahub.sh ${1}-fastcgi ${fastcgi_port} >> ${seahub_init_log}
    40.                 else
    41.                         sudo -u ${user} ${script_path}/seahub.sh ${1} >> ${seahub_init_log}
    42.                 fi
    43.         ;;
    44.         restart)
    45.                 sudo -u ${user} ${script_path}/seafile.sh ${1} >> ${seafile_init_log}
    46.                 if [ $fastcgi = true ];
    47.                 then
    48.                         sudo -u ${user} ${script_path}/seahub.sh ${1}-fastcgi ${fastcgi_port} >> ${seahub_init_log}
    49.                 else
    50.                         sudo -u ${user} ${script_path}/seahub.sh ${1} >> ${seahub_init_log}
    51.                 fi
    52.         ;;
    53.         stop)
    54.                 sudo -u ${user} ${script_path}/seahub.sh ${1} >> ${seahub_init_log}
    55.                 sudo -u ${user} ${script_path}/seafile.sh ${1} >> ${seafile_init_log}
    56.         ;;
    57.         *)
    58.                 echo "Usage: /etc/init.d/seafile-server {start|stop|restart}"
    59.                 exit 1
    60.         ;;
    61. esac

    注意：

    1. 如果你想要以 fastcgi 模式运行 seahub ,只需要将 fastcgi 的值配置为 true

    2. 如果你是在 MySQL 下部署 Seafile，添加 “mysql” 到 Required-Start 那行：

    1. <!-- -->
    3. # Required-Start: $local_fs $remote_fs $network mysql

    为日志添文件加目录

    1. mkdir /path/to/seafile/dir/logs

    确保 seafile-server 脚本可执行

    1. sudo chmod +x /etc/init.d/seafile-server

    添加 seafile-server 到 rc.d

    1. sudo updata-rc.d seafile-server defaults

    完成

    如果你更新了你的 seafile 服务，不要忘记更新 script_path 的值。

    RHEL/CentOS

    在 RHEL/CentOS 上，脚本 /etc/re.local 会在系统启动时被执行，所以可以通过这个脚本来实现 seafile/seahub 开机自启。

    • 确定您的 python 版本 (python 2.6 或者 2.7)
    1. which python2.6 # 或者 "which python2.7"
    • 在 /etc/rc.local 中添加 python2.6(2.7) 的目录到 PATH,并且添加 seafile/seahub 的启动命令
    1. # Assume the python 2.6(2.7) executable is in "/usr/local/bin"
    2. PATH=$PATH:/usr/local/bin/
    4. # Change the value of "user" to your linux user name
    5. user=haiwen
    7. # Change the value of "seafile_dir" to your path of seafile installation
    8. # usually the home directory of $user
    9. seafile_dir=/data/haiwen
    10. script_path=${seafile_dir}/seafile-server-latest
    12. sudo -u ${user} ${script_path}/seafile.sh start > /tmp/seafile.init.log 2>&1
    13. sudo -u ${user} ${script_path}/seahub.sh start > /tmp/seahub.init.log 2>&1

    注意： 如果你想要以 fastcgi 模式启动，只需要将最后一行的 “seahub.sh start” 改为 “seahub.sh start-fastcgi”

    • 完成。如果你更新了你的 seafile 服务，不要忘记更新 script_path 的值。

    RHEL/CentOS (run as service)

    在 RHEL/CentOS 我们使用 /etc/init.d/ 脚本来实现 seafile/seahub 服务开机自启动。

    创建文件 /etc/sysconfig/seafile

    1. # Change the value of "user" to your linux user name
    2. user=haiwen
    4. # Change the value of "seafile_dir" to your path of seafile installation
    5. # usually the home directory of $user
    6. seafile_dir=/data/haiwen
    7. script_path=${seafile_dir}/seafile-server-latest
    8. seafile_init_log=${seafile_dir}/logs/seafile.init.log
    9. seahub_init_log=${seafile_dir}/logs/seahub.init.log
    11. # Change the value of fastcgi to true if fastcgi is to be used
    12. fastcgi=false
    14. # Set the port of fastcgi, default is 8000. Change it if you need different.
    15. fastcgi_port=8000

    创建一个脚本 /etc/init.d/seafile

    1. #!/bin/bash
    2. #
    3. # seafile
    5. #
    6. # chkconfig: - 68 32
    7. # description: seafile
    9. # Source function library.
    10. . /etc/init.d/functions
    12. # Source networking configuration.
    13. . /etc/sysconfig/network
    15. if [ -f /etc/sysconfig/seafile ];then
    16.         . /etc/sysconfig/seafile
    17.         else
    18.             echo "Config file /etc/sysconfig/seafile not found! Bye."
    19.             exit 200
    20.         fi
    22. RETVAL=0
    24. start() {
    25.         # Start daemons.
    26.         echo -n $"Starting seafile: "
    27.         ulimit -n 30000
    28.         su - ${user} -c"${script_path}/seafile.sh start >> ${seafile_init_log} 2>&1"
    29.         RETVAL=$?
    30.         echo
    31.         [ $RETVAL -eq 0 ] && touch /var/lock/subsys/seafile
    32.         return $RETVAL
    33. }
    35. stop() {
    36.         echo -n $"Shutting down seafile: "
    37.         su - ${user} -c"${script_path}/seafile.sh stop >> ${seafile_init_log} 2>&1"
    38.         RETVAL=$?
    39.         echo
    40.         [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/seafile
    41.         return $RETVAL
    42. }
    44. #
    45. # Write a polite log message with date and time
    46. #
    47. echo -e "\n \n About to perform $1 for seafile at `date -Iseconds` \n " >> ${seafile_init_log}
    49. # See how we were called.
    50. case "$1" in
    51.   start)
    52.         start
    53.         ;;
    54.   stop)
    55.         stop
    56.         ;;
    57.   restart|reload)
    58.         stop
    59.         start
    60.         RETVAL=$?
    61.         ;;
    62.   *)
    63.         echo $"Usage: $0 {start|stop|restart}"
    64.         RETVAL=3
    65. esac
    67. exit $RETVAL

    创建脚本 /etc/init.d/seahub

    1. #!/bin/bash
    2. #
    3. # seahub
    5. #
    6. # chkconfig: - 69 31
    7. # description: seahub
    9. # Source function library.
    10. . /etc/init.d/functions
    12. # Source networking configuration.
    13. . /etc/sysconfig/network
    15. if [ -f /etc/sysconfig/seafile ];then
    16.         . /etc/sysconfig/seafile
    17.         else
    18.             echo "Config file /etc/sysconfig/seafile not found! Bye."
    19.             exit 200
    20.         fi
    22. RETVAL=0
    24. start() {
    25.         # Start daemons.
    26.         echo -n $"Starting seahub: "
    27.         ulimit -n 30000
    28.         if [  $fastcgi = true ];
    29.                 then
    30.                 su - ${user} -c"${script_path}/seahub.sh start-fastcgi ${fastcgi_port} >> ${seahub_init_log} 2>&1"
    31.                 else
    32.                 su - ${user} -c"${script_path}/seahub.sh start >> ${seahub_init_log} 2>&1"
    33.                 fi
    34.         RETVAL=$?
    35.         echo
    36.         [ $RETVAL -eq 0 ] && touch /var/lock/subsys/seahub
    37.         return $RETVAL
    38. }
    40. stop() {
    41.         echo -n $"Shutting down seahub: "
    42.         su - ${user} -c"${script_path}/seahub.sh stop >> ${seahub_init_log} 2>&1"
    43.         RETVAL=$?
    44.         echo
    45.         [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/seahub
    46.         return $RETVAL
    47. }
    49. #
    50. # Write a polite log message with date and time
    51. #
    52. echo -e "\n \n About to perform $1 for seahub at `date -Iseconds` \n " >> ${seahub_init_log}
    54. # See how we were called.
    55. case "$1" in
    56.   start)
    57.         start
    58.         ;;
    59.   stop)
    60.         stop
    61.         ;;
    62.   restart|reload)
    63.         stop
    64.         start
    65.         RETVAL=$?
    66.         ;;
    67.   *)
    68.         echo $"Usage: $0 {start|stop|restart}"
    69.         RETVAL=3
    70. esac
    72. exit $RETVAL

    然后设置开机自启：

    1. chmod 550 /etc/init.d/seafile
    2. chmod 550 /etc/init.d/seahub
    3. chkconfig --add seafile
    4. chkconfig --add seahub
    5. chkconfig seahub on
    6. chkconfig seafile on

    并且运行：

    1. service seafile start
    2. service seahub start